Raw Material Can Be Used
Including all kinds of waste paper, such as waste carton boxes, waste newspaper, waste books, waste cardboard, waste white edge paper, used egg trays, etc.
Pulp Molding Products Can Be Made
Machine Capacity
Model | PT 1-3 | PT 1-4 | PT 3-4 | PT 4-4 | PT 4-8 | PT 5-8 | PT 6-8 | PT 8-8 | |
Capacity (piece/h) | 800-1000 | 1200-1500 | 2000 | 2500 | 4000-4500 | 4500-5500 | 6000-7000 | 8000-9000 | |
Forming mold quantity | 3 | 4 | 12 | 16 | 32 | 40 | 48 | 64 | |
Total power (kw) | 38 | 45.5 | 53.7 | 82 | 127 | 161 | 223 | 370 | |
Electricity consumption(kw/h) | 26.6 | 31.85 | 37.59 | 57.4 | 89 | 113 | 156 | 260 | |
Labor force | 3-5 | 4-6 | 4-6 | 4-6 | 4-6 | 5-7 | 6-8 | 6-8 | |
Waste paper consumption(kg/h) |
85 | 102 | 170 | 212 | 298 | 425 | 520 | 600 | |
Water consumption(kg/h) | 255 | 306 | 510 | 636 | 1147 | 1275 | 1560 | 1800 | |
Fuel consumption | Natural Gas(m³) | 22-32 | 26-36 | 37-47 | 46-56 | 56-66 | 92-103 | 92-103 | 120-130 |
Diesel(kg) | 18-28 | 22-32 | 30-40 | 38-48 | 46-56 | 77-87 | 77-87 | 100-110 |
Note: The data here are for your reference only, the real data shall be based on actual production.
Introduction of Pulp Molding Machine
- Pulp molding is a three-dimensional papermaking technology. It uses pulp as raw material and a mold with a filter to dehydrate the pulp under pressure (negative pressure or positive pressure). The processing method of forming to produce the desired product.
- The pulp molding process mainly includes pulping system, molding system, drying system and packing system.
- Auxiliary equipment: hydraulic pulper, forming machine, air compressor, vacuum pump, homogenizer, slurry supply pump, water pump, sewage pump, molds cleaning machine, stacker, baler, hot pressingmachine.
- Pulp molded products are widely used as liner materials for commodity inner packaging. They have the advantages of low manufacturing cost, good product protection, no pollution to the environment, and recyclability, which are typical of green packaging. As a packaging product, its application range is quite wide. It can be used for food packaging, electronic products, electrical appliances, handicrafts and toys, hardware and industrial turnover packaging, to replace the commonly used foam plastic lining shockproof packaging products.
Advantages of Pulp Molding Machine
Wide sources of raw materials:
Including all kinds of waste paper, such as waste carton boxes, newspaper, waste books, waste cardboard, waste white edge paper, etc., with abundant sources and low prices, which belong to the comprehensive utilization of waste;
Environmental protection:
The water used in the production process is recycled, there is no waste water or exhaust gas discharge, which is environmental protection.
Can be recycled:
Pulp molded products can be recycled, and even if they are discarded in the natural environment, they are easily decomposed and decomposed into organic substances like ordinary paper, which is a completely environmentally friendly product.
Small volume, easy to store:
The volume is smaller than foamed plastic, it can be overlapped, and convenient for transportation.